Rubber Safety Surfaces

Polimor ING provides complete on-site rubber crumb surfacing solutions, creating continuous, impact-absorbing and visually designed surfaces that meet the safety needs of active outdoor environments.

Each project is carried out using a professional two-layer system of SBR and EPDM rubber granules, cast directly on site and adapted to the specific requirements of the area.

Rubber impact-absorbing surfaces are now the standard solution required in play areas for toddlers and children, as well as in areas with high fitness equipment intended for adults.

Polimor ING specializes in the installation of rubber surfaces in open outdoor areas, semi-covered spaces and rooftops, in accordance with Standard 1498.

Standard 1498 requires impact-absorbing safety surfaces in public spaces where playground equipment and play facilities are installed.

If you need rubber surfaces for a kindergarten yard?

Impact-absorbing rubber surfaces for fitness and playground equipment?

Rubber flooring for a private outdoor yard?

Polimor ING brings many years of experience in casting EPDM and SBR rubber crumb surfaces to create designed, standard-compliant, impact-absorbing rubber flooring.

Rubber Flooring for Covered, Semi-Covered and Outdoor Spaces

Polimor ING specializes in the installation of uniform, continuous and durable rubber flooring, with impact-absorbing performance adapted to the specific characteristics of the site and its intended use.

In exposed outdoor areas, the installation of a shade net is recommended.

A rubber floor surface made from cast rubber granules covers the entire area intended to serve as a safety surface and does not leave unsafe edges.

The thickness of the rubber flooring, the fall height and the impact-absorbing capacity of the safety surface are determined according to Standard 1498.

These factors are affected both by the height of the playground or fitness equipment and by the specific characteristics of the site.

Polimor ING has many years of experience in creating rubber floor surfaces that provide the required level of safety and impact absorption, while also allowing a wide variety of designs.

Rubber Surfaces for Kindergarten Yards Instead of Sand Surfaces

Rubber surfaces are the modern alternative to sand surfaces, which were previously used as an outdated and unhealthy impact-absorbing layer and safety surface in play areas.

Sand could contain bacteria and required replacement every six months.

Today, cast rubber safety surfaces made from EPDM rubber granules and SBR rubber flakes are the standard and preferred solution for creating rubber surfaces in kindergarten yards and playgrounds.

Impact-absorbing rubber crumb surfaces are installed over a hard infrastructure, such as concrete, asphalt, paving stones, compacted bedding and similar stable bases.

This installation method enables the creation of endless colorful, vibrant and customized patterns.

The system is built as a two-layer rubber crumb surface, applied directly on site:

• A base layer made from black SBR rubber flakes/
• An upper layer made from cast EPDM rubber granules in a wide range of colors.

The colored EPDM granules usually make up approximately 50%-70% of the material by weight.

This type of rubber surface for yards, applied through direct on-site rubber casting/

It provides both an impressive design solution and a professional answer for creating a safety surface at the required standard level.

In the gallery, you can view many examples of rubber surfaces for yards, public playgrounds, private playgrounds and private outdoor spaces.

Two-Layer Rubber Crumb Surfacing Applied Directly on Site

The rubber surfaces installed by Polimor ING are not ready-made tiles or loose flooring elements.

They are created through professional on-site casting of rubber granules, forming a continuous two-layer surface.

The lower SBR layer provides the main impact-absorbing function of the surface.

The upper EPDM layer provides the finished appearance, color, durability and design flexibility.

This direct on-site application allows the surface to be adapted to the shape of the area, the required safety level, the existing infrastructure and the visual design of the project.

Professional Rubber Safety Surfaces for Playgrounds, Kindergartens and Fitness Areas

Polimor ING provides professional rubber safety surfaces for a variety of uses, including:

• Kindergarten yards,
• Public playgrounds,
• School yards,
• Private yards,
• Rooftop play areas,
• Semi-covered spaces,
• Outdoor fitness areas,
• Playground equipment zones
• And more

Each project is planned according to the intended use of the area, the type and height of the equipment, the condition of the infrastructure and the required level of impact absorption.

The result is a continuous, safe, durable and visually designed rubber surface, suitable for intensive daily use in educational, public and private environments.

For professional information, please call: 054-6813878.
For price quotes for safety impact-absorbing rubber surface casting, please call: 054-3024203. We will be happy to assist you.